Gage Bilt Pneudraulic Rivet Guns | GB745 |

GB745 pneumatic-hydraulic tools are used to install a wide range of blind rivets, lockbolts and MAGNA-GRIP® fasteners. GB745 riveters weigh just over 7 lbs. (3.17 kg) and can be operated in any position with one hand. GB745 rivet hammers have a .620" (16.26 mm) rivet setting stroke and a rated pull load of 6300 (28.0 kN) pounds with 90 psi (6.2 bar) air pressure at the air inlet.

Gage Bilt GB745 rivet installation tools operate on 90 to 100 psi (6.2-6.9 bar) of air pressure, providing the maximum efficiency. At 90 psi. (6.2 bar) of air pressure, the GB745 does not exceed 81.5 dB (A) and consumes 6.0 cfm at 20 cycles per minute.

The air inlet is provided with 1/4-18 female pipe thread for accepting the user's air hose fitting.

• 3/16" (4.8) thru 3/8" (10.0) C6L® and Avdelok® lockbolts
• 3/16" (4.8) thru 5/16" (8.0) Magna-Grip® and Maxlok® lockbolts
• 3/16" (4.8) thru 5/16" (8.0) Monobolt® and Magna-Lok® structural rivets
• 3/16" (4.8) and 1/4" (6.4) BOM® and Avboltcblind bolts

• 5/16" (8.0) Ornilock® blind rivets
• 1/4" (6.4) Mega Orlock® blind bolts

GB745 is compatible with nose assemblies BOM08-755A-23, HT12-756-23, LB10-756-26, LB12-756-26, MG06-745-24, MG08-745-24, NAS08-2581-23.

Nose assemblies are sold separately.

APPLICATIONS:

• Commercial & aerospace Lockbolt tool
• C6L® thru 3/8"
• BOM® and MAGNA-GRIP® thru ¼"
• Blind Rivet & Blind Bolt thru 5/16"

SPECIFICATIONS:

• Accepts 1 1/16" diameter GB & Huck® noses
• Load: 6,300 lbs.
• Stroke: .620"