Gage Bilt Pneudraulic Rivet Guns | GB756 | HUCK-STYLE RIVET TOOL

GB756 hydraulic installation tools are used to install a wide range of blind, lockbolt and Magna-Grip® fasteners thru 3/8" diameter. The GB756 series riveter weighs 11.1 lbs. (5.03 kg) and can be operated in any position with one hand. It has a .960" (24.38 mm) rivet setting stroke and a rated pull load of 10,000 lbs. (44.48 kN).

Gage Bilt GB756 rivet hammers operate on 90 to 100 psi (6.2-6.9 bar) of air pressure, providing the maximum efficiency. At 90 psi. (6.2 bar) of air pressure, the GB756 does not exceed 81.5 dB (A) and consumes 6.0 cfm at 20 cycles per minute.

The air inlet is provided with 1/4-18 female pipe thread for accepting the user's air hose fitting.

GB756 is compatible with nose assemblies BOM08-755A-23, BOM10-756-26, HT12-756-23, LB10-756-26, LB12-756-26, MG10-756-28, MG12-756-28, MGL10-353-28, MGL12-353C-28, NAS-08-2581-23. See the GB756 Nose Assembly chart for more options.

Nose assemblies are sold separately.

APPLICATIONS:

• Commercial & aerospace Lockbolt tool
• C6L® thru 3/8"
• BOM® thru 5/16"
• MAGNA-GRIP® thru 3/8"
• Blind Rivet & Blind Bolt thru 3/18"

SPECIFICATIONS:

• Accepts 1 1/16" diameter GB & Huck® noses
• Load: 10,000 lbs.
• Stroke: .960"